|100 series Micro Peristaltic Pumps|
A very compact, low cost peristaltic pump available as a pumphead only or with various AC or DC drives. Available with various tube materials and sizes. On the new design, from February 2019 the tube can be changed.
|150 series Peristaltic Pumps|
A very compact, high quality peristaltic pump with easy tube change. It is available with brushed DC & stepper motor drives & has tube material & size options. There is an optional 6 roller assembly available.
|200 series Mini Peristaltic Pumps|
A compact, low cost peristaltic pump available as a pumphead only or with various AC or DC drives. Available with various tube materials and sizes. The pumphead is sealed for life as standard, but can be supplied open if required.
|300 series Peristaltic Pumps|
A mid size peristaltic pump that offers long tube life and simple tube change. It is available as a pumphead without drive, with AC shaded pole & stepper motors. There is a special chemical resistant 'PP' version. There are tube material & size options.
|400i series Peristaltic Pumps|
A robust, high flow (up to 8 Litres per minute), industrial quality peristaltic pump with simple tube change. It is available as a pumphead without drive, with brushed DC or AC Induction drives. There are tube material and size options.
Note:- Minimum order quantity 5 pcs.
|810 series Peristaltic Pumps|
The ever popular 810 series peristaltic pumps are available in a range of AC and DC motor options and various tube size combinations delivering flow rates as high as 987 ml/min. They are self priming up to 6 metres, can be run dry continuously (mains motors may require fan cooling), and are non-siphoning.
With peristaltic pumps the material to be pumped only comes in contact with the tubing. This is ideal for applications where the product to be moved or pumped should not touch any foreign materials. For example when dispensing slurries, food products, chemicals, or other difficult to handle fluids.
The 810 peristaltic pump can handle a wide variety of viscosities, from air to gases to heavy slurries, with a consistent positive displacement. Each revolution of the roller assembly delivers a precise amount of product.
There is a choice of Silicone (peroxide cured) or Santoprene tubing (55 shore as standard), with 4.8mm ID & 6.4mm ID available in both.
There is a choice of 2 or 3 rollers.
There is a choice of clear polycarbonate (standard) or black polypropylene (optional) pump heads.
There is a choice of flat mounting plate (standard) or 'L' shaped bracket (optional).
There are many OEM options for volume applications so please contact our office for further details.
|250 series Pumphead only & AC & DC driven models|
A high quality peristaltic pumphead that offers very easy tube change and has sprung tube grips to accept 1.6 ID - 5mm ID tubes.
In this section the pumphead without drive, the AC synchronous & brushed DC driven versions are shown. Also see Stepper motor versions.
|4000 Series Peristaltic Pump|
A high flow peristaltic pump (up to 3.5L per minute) with easy tube change. The pump is fitted with a brushed DC drive, available in 12 or 24VDC. There are tube material & size options.